Contents
Your bathroom extractor fan has an important task. It keeps the moisture level low in your bathroom so you can avoid mould issues. By using the bathroom extractor after each one of your steamy showers, you eliminate moisture quickly. Did you know that there is maintenance required to keep this fan running properly? Follow these simple instructions on how to clean bathroom extractor fan so you can keep your family free from mould.
Items You’ll Need to Clean Bathroom Extractor Fan
This job only takes about 15 minutes and doesn’t require many tools. Here’s what you need to clean bathroom extractor fan quickly and efficiently.
- Screwdriver
- Soft Cloth
- Mild Soap
Steps to Clean Bathroom Extractor Fan
Begin by turning the power off to your bathroom. This should be done at your main panel.
Then, you need to locate the bathroom extractor fan. Typically the fan will be found high up on the wall or in the ceiling. Keep in mind that not all bathrooms have this fan. If you have an exterior window, your bathroom might not have been designed with a fan. If you find that your bathroom doesn’t have a fan or a window, it would be wise to contact a professional to have one installed.
Use your screwdriver to loosen the screws that hold the cover in place. Be careful when removing the cover.
Once you locate the extractor fan blade, look to see if there are additional screws which hold it in place. If so, now is the time to remove them. Remove the blade whenever possible because it will be easier to clean. Also, be sure you put your screws in a safe place so you don’t lose any.
Start by cleaning the cover of the fan blade. Use soap and warm water. Wipe away all the debris and dirt so it doesn’t circulate with your fan and end up in your air. Then, clean the fan blade on both sides. Allow everything to dry completely before reassembling.
Other Steps to Clean Bathroom Extractor Fan
If you don’t have time to do a full cleaning, try spraying the vent with some canned air. This will only remove the visible dust and isn’t a long-term fix, but will help you in the short-term until you have more time.
It is also important that you inspect the vent carefully while it is apart. See if you can determine where the vent takes your moist air. Ideally, it will lead outside or to another part of the home with an exterior vent. If you find that the air is just recirculating into your bathroom, you might want to consider calling a professional in before you begin having problems with mould.
While you are servicing the bathroom, it might be wise for you to learn How to Get Rid of Mould in the Shower. In addition, it would be wise if you ran a dehumidifier in the bathroom as this is an area of high moisture. Head to our Dehumidifier Reviews to find a model that is right for you.
Conclusion
It doesn’t take a lot of work to clean a bathroom extractor fan and it is well worth the time. Don’t neglect this simple piece of maintenance that should be your first stop in fighting mould in your bathroom.
